• Eye wash Station, Emergency Eye Wash with Large Eye Wash Bowl, Pedestal Mounted, 304 Stainless Steel, for Labs Chemical Factories Rescue

• [Straight edge round washbasin]: The edge of the basin is designed to be a smooth right angle to prevent water from splashing and leaking quickly
• [304 stainless steel filter screen]: The double-layer filter increases the cleaning rate by 90% compared with ordinary nozzles, can filter impurities in the water, and the water is soft and foamy to avoid secondary damage to the eyes
• [Luminous hand push plate]: The eyewash valve opens and closes the water inlet for 4 minutes, making emergency use at night more convenient
• [Thickening and widening base]: One-piece stamping and forming, 304 thick stainless steel, can withstand 350 kilograms of pressure, diameter 20.5, strong and durable, as stable as a rock
• [Stainless Steel Material]: made of SS304 stainless steel, with a smooth surface, excellent acid, alkali corrosion resistance. Eye wash station can be installed outdoors or indoors, can be effectively used 0.3 million times

• Product description:
• Double nozzle design, Double nozzles have better cleaning effect, more convenient and faster, sustainable water flow for 15 minutes, ergonomic design distance, and accurate cleaning of eyes
• Round bowl eyewash stations provide the highest level of emergency eye washing performance. All traditional series eye wash solutions feature dual spray heads with automatic flow controls. The safety eye wash station’s aerated water flow, signature feature, allows soft flowing water to provide a wider coverage, cleaning full facial areas.

• Product Details:
• Material: Vertical foot-operated eyewash
• Material: SUS304 seamless stainless steel
• Spray flow: 75.7-180L/min
• Eyewash flow: 12-18 liters/min
• Washbasin: 320mm

• Installation and commissioning
• The installation location should be within 15 meters of the accident-prone place, and the flushing place can be reached within 10 seconds of running speed.
• Assemble the components as shown in the figure. The joints of the components need to be wrapped with sealing tape (such as PTFE tape), and the water pipes are connected according to the diameter of the water inlet and outlet respectively.
• After connecting the inlet and drain pipes, check whether the ball valve switch is in place flexibly and whether there is jamming.